Xerox VersaLink B405

Xerox
®
VersaLink
®
C405/B405 Multifunction Printer
Security Function Supplementary Guide
22
Set Auto Clear
Follow the procedure below to configure the Auto Clear settings.
1.
Select System .
2.
Select Timeouts .
3.
Enter a time for Reset Device Control Panel.
4.
Enter a time for Reset Device Website.
5.
Select OK .
6.
Select Restart Later if prompted.
Set Store Print
Follow the procedure below to configure the Store Print settings.
1.
Select System .
2.
Select Defaults and Policies .
3.
Select Allowed Print Job Types for Printer Settings.
4.
Select Personal, Secure, and Saved Only .
5.
Select OK .
6.
Select Restart Later if prompted.
7.
Select Close .
Set Audit Log
Follow the procedure below to configure the Audit Logs settings.
1.
Select System .
2.
Select Logs .
3.
Select Audit Log .
4.
Enable this service.
5.
Select OK .
6.
Select Restart Later if prompted.
Set Software Download
Follow the procedure below to configure the Software Download settings.
1.
Select System .
2.
Select Software Update .
3.
Select Disable .
4.
Select Disable .
5.
Select Restart Now if prompted.