2. If the staple cartridges are not visible, grip the vertical panels at the left and right of the opening
and slide the panels to the center.
3. Hold the tabs on both sides of the staple cartridge and pull the cartridge out of the finisher.
4. Hold the tabs on both sides of the new staple cartridge and insert the cartridge into the original
position in the finisher.
Note: If you have trouble inserting the cartridge, ensure that the staples are positioned
correctly in the cartridge.
Note: The booklet maker uses two staple cartridges. Booklet stapling requires that both
staple cartridges contain staples.
5. Repeat the procedure for the other staple cartridge.
195
To Next Page
Loading...
Need help?
General
