3. To install the Wireless Network Adapter, follow the instructions provided with the Wireless
Network Adapter.
Caution: Pulling on the adapter can cause damage. After the adapter is installed, remove it
only as needed, and as directed in the Wireless Network Adapter removal instructions.
For details, refer to Removing the Wireless Network Adapter.
4. Configure the Wi-Fi settings. For details about configuring the Wi-Fi settings, refer to the System
Administrator Guide at www.xerox.com/office/VLB71XXdocs.
Removing the Wireless Network Adapter
To remove the Wireless Network Adapter:
1. Power off the printer:
a. At the printer control panel, press the Power/Wake button, then touch Power Off.
b. Wait for the printer to complete a power-off procedure. When complete, the touch screen
appears blank.
61
To Next Page
Loading...
