2. Ensure that the paper guides are set in the correct position for the size labels you are loading.
3. Remove any paper that is a different size or type.
4. To move out the length or width paper guide, release the guide lock, then slide out the length or width paper
guide.
5. Load labels in the tray.
• For long-edge feed, insert labels face up with the top edge toward the back.
• For short-edge feed, insert labels face up with the top edge to the left
.
Note: Do not load paper above the maximum fill line. Overfilling the tray can cause paper jams.
Xerox
®
VersaLink
®
C71XX Series Color Multifunction Printer User Guide 187
Paper and Media
To Next Page
Loading...
