Xerox VersaLink C7130 - Replacing Staples in the Main Stapler of the Office Finisher

6. Grasp the new staple cartridge by the orange handle, then insert the cartridge into the stapler until it clicks.
7. Close the finisher front door.
REPLACING STAPLES IN THE MAIN STAPLER OF THE OFFICE FINISHER
CCaauuttiioonn:: Do not perform this procedure while the printer is printing.
1. Open the finisher front door.
2. Reach into the finisher cabinet and pull the stapler toward you until it stops.
Xerox
®
VersaLink
®
C71XX Series Color Multifunction Printer User Guide 211
Maintenance