Xerox VersaLink C7130 - Page 237

2. At Door C, lift the release lever, then open Door C.
3. Remove any jammed paper in the paper output area.
Note: If the paper is torn, remove all torn pieces from the printer.
4. To close Door C, push the door up firmly until it clicks into place.
5. Close Door A and the Bypass Tray.
a. To close Door A, push the door up firmly until it clicks into place.
b. Close the Bypass Tray.
Xerox
®
VersaLink
®
C71XX Series Color Multifunction Printer User Guide 237
Troubleshooting