b. To remove dirt, wipe the document cover with a soft cloth moistened with water and then
wipe it dry with a soft cloth. If dirt is difficult to remove, try gently wiping with a soft cloth
moistened with a small amount of neutral detergent.
2. Cleaning the document (platen) glass
a. To remove dirt, wipe the document glass with a soft cloth moistened with water and then
wipe it dry with a soft cloth. If dirt is difficult to remove, try gently wiping with a soft cloth
moistened with a small amount of neutral detergent.
Caution: Do not press heavily on the document glass to avoid damaging the glass
surface.
3. Cleaning the second-side scanning lens assembly
a. The second-side scanning lens assembly is located along the left side of the document
cover. The assembly consists of the mirrored-glass strip, a metal strip, a white-plastic strip,
and rollers. All parts of the assembly must be cleaned to ensure the best image quality when
making copies.
Xerox
®
Versant
®
280 Press
Quick Start Guide
23
Maintenance
To Next Page
Loading...
