PPaappeerr JJaammss iinn tthhee BByyppaassss ((TTrraayy 55))
PPaappeerr JJaammss iinn tthhee SSttaannddaalloonnee BByyppaassss ((TTrraayy 55))
Important: Use this procedure to clear paper jams in the Bypass (Tray 5) when it is a
standalone feeding device and is not installed on any optional feeder (such as the Advanced
Oversized High Capacity Feeder).
Tip: Always ensure that all paper jams, including any small, ripped pieces of paper, are cleared
before proceeding with any copy/print jobs.
1. Remove the jammed paper and any paper that is loaded from the Bypass tray.
Note: If paper is torn, check inside the press and remove it.
2. Open the Bypass Top Cover and remove jammed paper.
3. Close the cover.
4. Reload paper into the tray and resume copying / printing.
Xerox
®
Versant
®
280 Press
Quick Start Guide
41
Troubleshooting
To Next Page
Loading...
