DDooccuummeenntt JJaammss UUnnddeerr tthhee DDooccuummeenntt FFeeeeddeerr BBeelltt
1. Open the document feeder.
2. Open the belt of the document cover while gripping the lever and remove the jammed document.
3. Gently return the belt to the original position.
4. Close the document feeder.
5. Follow the instructions to reload the entire document set into the document feeder.
Note: Ensure that there are not any torn, wrinkled, or folded documents in the document
set. To scan torn, wrinkled or folded documents, use the Document Glass, only. The already
scanned document sheets are automatically skipped and scanning resumes from the
document sheet last scanned prior to the jam.
36
Xerox
®
Versant
®
280 Press
Quick Start Guide
Troubleshooting
To Next Page
Loading...
