Xerox WorkCentre 4250 Installation Guide

Preparation
Xerox Common Access Card
Common Access Card Installation Guide
10
The method to validate the Domain certificate requires installation of the certificate chain including
the Root certificate on to the Xerox device. The Xerox WorkCentre may be configured to validate all
certificates via OCSP (Online Certificate Status Protocol Responder). It submits the Domain Certificate
and any associated Intermediary Certificates to the OCSP Responder, to verify that these certificates
are valid and not revoked. The WorkCentre then receives a response from the OCSP responder stating
whether these certificates are valid.
Note: Certificates are often obtained from the Information Technology professionals that support
your organization. The certificate chain consists of all Intermediate Certificates up to and
including the Root Certificate. If you are unable to obtain the required certificates, refer to the
process outlined in Appendix A. You can determine the domain that you are registered in using the
process outlined in Appendix B.
Server Specifications
Prior to installation, ensure your network infrastructure supports Common Access Card or Personal
Identification Verification (PIV).
Names or IP addresses of all servers and domains are required during setup.
Electrical Requirements
The USB port on the back of the Xerox device network controller provides the power required for any of
the supported card readers.

Xerox WorkCentre 4250 Specifications

General

Copier resize	25 - 400 %
Maximum number of copies	999 copies
Copy resolution (black text)	600 x 600 DPI
Copy speed (black, normal quality, A4)	45 cpm
Standard input capacity	600 sheets
Auto document feeder (ADF) input capacity	100 sheets
Power consumption (standby)	111 W
Power consumption (typical)	794 W
Maximum duty cycle	200000 pages per month
Print speed (black, normal quality, A4/US Letter)	- ppm
Drivers included	Yes
Type	Analog copier
Bundled software	Image Retriever, Nuance OmniPage, Nuance PaperPort
Sustainability certificates	ENERGY STAR
Storage temperature (T-T)	10 - 32 °C
Non-operating relative humidity (non-condensing)	20 - 80 %
Maximum resolution	- DPI
Maximum print size	215 x 355 mm
Standard media sizes	99 x 147 mm - 216 x 356 mm
Compatible operating systems	HP-UX 10.2, IBM AIX 4.2, Linux, Mandrake 9.2-10.1, Red Hat 9, SUSE 9, Windows 2003 Server, Windows Vista, Windows XP, Windows XP Pro HP-UX 10.2, IBM AIX 4.2, Linux, Mandrake 9.2-10.1, Red Hat 9, SUSE 9, Windows 2003 Server, Windows Vista, Windows XP, Windows XP Pro
Standard interfaces	USB 2.0
Dimensions (WxDxH)	622 x 483 x 648 mm
Certification	FCC Part 15, Class A, FCC Part 68, UL Listed 60950-1/CSA 60950-1-03, CE 2006/95/EC, 2004/108/EC and 1999/5/ EC, Section 508 ADA, Cerner Tested and Certified 2004/108/EC and 1999 / 5 / EC, Section 508 ADA