Xerox Common Access Card
Common Access Card Installation Guide
9
2
Preparation
This section explains the preparation and resources required to install the Common Access Card
software.
The installation will take approximately one hour for each device. The following items are required in
order to complete the installation:
Item Supplier
Compatible Card Readers and Access Cards (refer to Card Readers and
Card Types on page 7)
Customer
Common Access Card Enablement Kit 497K09950 (one required for
each Xerox device)
Xerox
Feature Enable Key Xerox
TCP/IP enabled on the device Customer
DNS Host name or static IP address assigned Customer
Network Settings to be checked to ensure network is fully functional Customer
Domain Controller (DC) information:
• Domain Controller authentication environment
• lP address or Host Name
• Domain information
• Domain Controller Root certificates
• Check that all certificates are in 64 bit X.509 format
Customer
Online Certificate Status Protocol (OCSP) Server Information:
•OCSP Server URL
• OCSP - Root and Intermediate Certificates
• Check that all certificates are in 64 bit X.509 format
Customer
Proxy Server configuration details Customer
To Next Page
Loading...
