Xerox WorkCentre 4250

Introduction
Xerox Common Access Card
Common Access Card Installation Guide
7
Card Readers and Card Types
Supported Card Readers
The customer is responsible for providing a card reader for each Xerox device. The following card
readers are compatible with the solution:
• Gemalto TOP DL GX4 144K V2.6.2b Applets
• Oberthur ID-One Cosmo v5.2 128K V2.6.2 Applets
• Oberthur ID-One Cosmo v5.2 72K V2.6.1 Applets
• Oberthur ID-One Cosmo v5.2D 72K V2.6.1 Applets
• Oberthur ID-One Cosmo v5.2 72K V2.6.2 Applets
• Gemalto GemCombiXpresso R4 dual interface 72K V2.6.2 Applets
• Axalto Access 64KV1
• Axalto Access 64KV1
• Gemplus GXP3 64V2N V2.6.1 Applets
• Gemalto Cyberflex Access V2C 64K V2.6.1 Applets
• Oberthur ID-One Cosmo V5.2D 64K
• Oberthur OCS Galactic V1 32K V1 Applets
• Oberthur Cosmo V4 32K V1 Applets
• Schlumberger / Axalto Cyberflex V2 32K V1 Applets
Other card types and CCID compliant readers may function with the solution, but have not been
validated.
Additional information from your System Administrator may be required to validate which card reader
works best in your environment.
Note: Information about CCID compliant card types can be obtained from various websites, for
example www.pcsclite.alioth.debian.org/ccid.This site is not a Xerox website and is not endorsed
by Xerox.