Xerox WorkCentre 4250 Installation Guide

Xerox Common Access Card
Common Access Card Installation Guide
23
4
Troubleshooting
For optimal performance from your card reader, ensure the following guidelines are followed:
• The Card Reader is only compatible with network connected products.
• Ensure the Card Reader is plugged into the Network Controller. Refer to Connect the card reader to
the Xerox device on page 20 for instructions.
• Do not position the Card Reader in direct sunlight or near a heat source such as a radiator.
• Ensure the Card Reader does not get contaminated with dust and debris.

Xerox WorkCentre 4250 Specifications

General

Copier resize	25 - 400 %
Maximum number of copies	999 copies
Copy resolution (black text)	600 x 600 DPI
Copy speed (black, normal quality, A4)	45 cpm
Standard input capacity	600 sheets
Auto document feeder (ADF) input capacity	100 sheets
Power consumption (standby)	111 W
Power consumption (typical)	794 W
Maximum duty cycle	200000 pages per month
Print speed (black, normal quality, A4/US Letter)	- ppm
Drivers included	Yes
Type	Analog copier
Bundled software	Image Retriever, Nuance OmniPage, Nuance PaperPort
Sustainability certificates	ENERGY STAR
Storage temperature (T-T)	10 - 32 °C
Non-operating relative humidity (non-condensing)	20 - 80 %
Maximum resolution	- DPI
Maximum print size	215 x 355 mm
Standard media sizes	99 x 147 mm - 216 x 356 mm
Compatible operating systems	HP-UX 10.2, IBM AIX 4.2, Linux, Mandrake 9.2-10.1, Red Hat 9, SUSE 9, Windows 2003 Server, Windows Vista, Windows XP, Windows XP Pro HP-UX 10.2, IBM AIX 4.2, Linux, Mandrake 9.2-10.1, Red Hat 9, SUSE 9, Windows 2003 Server, Windows Vista, Windows XP, Windows XP Pro
Standard interfaces	USB 2.0
Dimensions (WxDxH)	622 x 483 x 648 mm
Certification	FCC Part 15, Class A, FCC Part 68, UL Listed 60950-1/CSA 60950-1-03, CE 2006/95/EC, 2004/108/EC and 1999/5/ EC, Section 508 ADA, Cerner Tested and Certified 2004/108/EC and 1999 / 5 / EC, Section 508 ADA