Xerox WorkCentre 4250 Installation Guide

Xerox Common Access Card
Common Access Card Installation Guide
5
1
Introduction
The Common Access Card solution brings an advanced level of security to sensitive information.
Organizations can restrict access to the walk-up features of a Xerox device. This ensures only
authorized users are able to copy, scan, e-mail and fax information.
The key benefit of this solution is its two-factor identification requirement. Users must insert their
access card and enter a unique Personal Identification Number (PIN) at the device. This provides
added security in the event that a card is lost or stolen.
Once validated, a user is logged into the Xerox device for all walk-up features. The system allows for
functions to be tracked for an added layer of security.
The Common Access Card enablement kit integrates with Xerox multifunction printers and existing
smart and personal identity verification cards and readers.
This guide explains how to install and configure the Common Access Card solution. It identifies the
resources and equipment required to complete a successful installation.
Should you require any further information, please contact your Local Xerox Representative.

Xerox WorkCentre 4250 Specifications

General

Copier resize	25 - 400 %
Maximum number of copies	999 copies
Copy resolution (black text)	600 x 600 DPI
Copy speed (black, normal quality, A4)	45 cpm
Standard input capacity	600 sheets
Auto document feeder (ADF) input capacity	100 sheets
Power consumption (standby)	111 W
Power consumption (typical)	794 W
Maximum duty cycle	200000 pages per month
Print speed (black, normal quality, A4/US Letter)	- ppm
Drivers included	Yes
Type	Analog copier
Bundled software	Image Retriever, Nuance OmniPage, Nuance PaperPort
Sustainability certificates	ENERGY STAR
Storage temperature (T-T)	10 - 32 °C
Non-operating relative humidity (non-condensing)	20 - 80 %
Maximum resolution	- DPI
Maximum print size	215 x 355 mm
Standard media sizes	99 x 147 mm - 216 x 356 mm
Compatible operating systems	HP-UX 10.2, IBM AIX 4.2, Linux, Mandrake 9.2-10.1, Red Hat 9, SUSE 9, Windows 2003 Server, Windows Vista, Windows XP, Windows XP Pro HP-UX 10.2, IBM AIX 4.2, Linux, Mandrake 9.2-10.1, Red Hat 9, SUSE 9, Windows 2003 Server, Windows Vista, Windows XP, Windows XP Pro
Standard interfaces	USB 2.0
Dimensions (WxDxH)	622 x 483 x 648 mm
Certification	FCC Part 15, Class A, FCC Part 68, UL Listed 60950-1/CSA 60950-1-03, CE 2006/95/EC, 2004/108/EC and 1999/5/ EC, Section 508 ADA, Cerner Tested and Certified 2004/108/EC and 1999 / 5 / EC, Section 508 ADA