Machine Components
33
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
1
No. Component Function
1 Tray attachment
(Office Finisher LX)
Use this attachment when outputting unstapled A4 LEF, 8.5 x 11” LEF, or
B5 LEF paper to the Office Finisher LX tray.
NOTE: For information on how to use the tray attachment, refer to
Attaching the Tray Attachment to the Office Finisher LX (Optional) on
page 42.
2 Document glass Place a single-page or bound document here.
3 Booklet Maker
(optional)
(Office Finisher LX)
Makes stapled copies or prints with a crease for easy folding.
4 Booklet Maker side cover
(Office Finisher LX)
Open this cover when replacing the booklet staple cartridges.
5 Booklet staple cartridges
(Office Finisher LX)
Staple cartridges for booklet creation. The Booklet Maker contains two
booklet staple cartridges.
6 Top cover
(Office Finisher LX)
Open this cover when clearing paper jams.
7 Finisher tray
(Office Finisher LX)
Delivers outputs processed by the Office Finisher LX.
8 Folding Unit
(Office Finisher LX)
Makes a crease in each sheet of copies or prints for easy folding.
To Next Page
Loading...
Need help?
General
