Xerox WorkCentre 6655 - Mopria

Network Connectivity
36 Xerox
®
WorkCentre
®
6655 Color Multifunction Printer
System Administrator Guide
Mopria
Mopria is a software feature that enables users to print from mobile devices without requiring a print
driver. You can use Mopria to print from your mobile device to Mopria-enabled printers.
Notes:
• Mopria and all of its required protocols are enabled by default.
• Only Mopria-enabled devices support Mopria printing.
• Wireless devices must join the same wireless network as the printer. A system administrator can
connect the printer by its wired network interface.
• The device that submits the Mopria job must be on the same subnet as the printer. To allow
devices to print from different subnets, configure your network to pass multicast DNS traffic
across subnets.
• The name and location of your printer appears in a list of Mopria-enabled printers on
connected devices.
To configure Mopria:
1. In CentreWare Internet Services, click Properties>Connectivity>Setup.
2. For Mopria Discovery, click Edit.
3. Configure protocols as needed. To configure a protocol, click Edit.
4. For Mopria Discovery, select Enabled.
5. Click Save.