Scanning 
 
  Xerox
®
 WorkCentre
®
 6655 Color Multifunction Printer  177 
  System Administrator Guide 
 
Configuring a Template to Create a Password-Protected PDF 
You can edit a template to create an encrypted PDF file, and require users to protect the scanned PDF 
file with a password. When a user selects the scan template at the control panel, the printer prompts the 
user to create a password, or accept a default password. The password is required to open the PDF file. 
1.  Edit the Default Template on the Default Template page, or create a template on the Scan tab. 
2.  Add file destinations and edit settings as needed. 
3.  Under Document Management Fields, click Add. 
4.  Next to Field Name, type xrx_pdf_pswd. 
5.  Next to User Editable, select Not Editable to set the password, or select Editable to allow users to 
create a password. 
6.  If you selected Not Editable, type the password in the Default Value field. 
7.  If you selected Editable, do the following, if necessary: 
a.  Type a password in the Default Value field to suggest a default password. 
b.  Type text in the Field Label field to prompt users to enter a password. For example, type Please 
type a password to protect your PDF file. 
c.  Select Require User Input to require users to provide a password. 
d.  Select Mask User Input to hide characters that a user types at the control panel. If you do not 
select this option, the printer saves the password in the Job Log. To disable the Job Log, see 
below. 
e.  If you do not want the PDF password to appear in the Job Log, which can compromise security, 
ensure that the Record User Input to Job Log check box is cleared. 
8.  Click Apply. 
9.  Under Filing options, click Edit. 
10.  Next to File Format, select PDF. 
 
Note: Do not select PDF/A. If you select PDF/A, a password-protected PDF is not created. 
 
11.  Click Apply. 
12.  If you allowed users to create a password, but did not select Mask User Input, disable the Job Log. 
Under Report Options, click Edit, then next to the Job Log, clear the Enabled check box. 
13.  Click Apply.