EasyManua.ls Logo

Xiaomi mi G10 Plus - How to Install; Display Screen

Xiaomi mi G10 Plus
159 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 6
Display Screen
Note: If the vacuum cleaner experiences a malfunction, the display screen will show an error message. For a solution, please refer to the Troubleshooting section.
Lock/Unlock Status
Battery Level Indicator
Electronic Lock Button
Charging/Low Battery Level Indicator
Battery Level Percentage
The indicator displays the remaining battery.
When the battery level is lower than 10%, the
indicator will change from green to red.
Error Message
Modes
Suction Level Button
Blinking red: Battery level ≤ 10%
Green: Battery level > 10%
Pulsing red: Battery level ≤ 10% (charging)
Pulsing green: Battery level > 10% (charging)
When the display shows "LO", it indicates that the
battery level is lower than 10%.
Filter Not Installed
Roller Brush Stuck
Airway Blocked
High-temperature Alert
High Power
Standard
Eco
Press to enable/disable the continuous mode
Press to switch the suction levels
Installing the Accessories onto the Vacuum Cleaner
Note: Mini electric brush should not be used with the extension rod.
How to Install
Insert until it clicks into place

Table of Contents

Related product manuals