Xilinx Alveo U250 Getting Started

Chapter 4
Installing the Deployment Software
This chapter details the procedures for installing deployment soware on RedHat/CentOS and
Ubuntu operang systems. All soware installaons use standard Linux RPM and Linux DEB
packages and require root access.
The deployment soware consists of the following soware packages:
• Xilinx
®
runme (XRT): XRT provides the libraries and drivers for an applicaon to run on
Alveo™ cards.
• Deployment plaorm: The deployment plaorm provides the base rmware needed to run
pre-compiled applicaons. It cannot be used to compile or create new applicaons. To create
new applicaons, install the development soware detailed in Chapter 6: Next Steps. While
you can also install the development soware on a machine with an installed card, doing so is
not necessary to run applicaons.
For plaorm features and details, see Alveo Data Center Accelerator Card Plaorms User Guide
(UG1120).
If you encounter any issues during installaon, see Chapter 7: Troubleshoong and Known
Issues. See Xilinx Answer Record 71752 for addional known issues.
IMPORTANT!
Root access is required for all soware and rmware installaons.
IMPORTANT! L'accès Root est requis pour toutes les installaons logicielles et rmware.
WICHTIG! Root-Zugri ist für alle Soware- und Firmware-Installaonen erforderlich.
XRT and Deployment Platform Installation
Procedures on RedHat and CentOS
Use the following steps to download and install the XRT and deployment plaorm using a .rpm
installaon package.
Chapter 4: Installing the Deployment Software
UG1301 (v1.5) June 3, 2020 www.xilinx.com
Getting Started with Alveo Accelerator Cards 20
Send Feedback

Xilinx Alveo U250 Specifications

General

Brand	Xilinx
Model	Alveo U250
Category	Computer Hardware
Language	English