Xilinx Alveo U250 User Manual

Chapter 2
Card Installation and Configuration
Electrostatic Discharge Caution
CAUTION! ESD can damage electronic components when they are improperly handled, and can result in total
or intermient failures. Always follow ESD-prevenon procedures when removing and replacing components.
To prevent ESD damage:
• Use an ESD wrist or ankle strap and ensure that it makes skin contact. Connect the equipment
end of the strap to an unpainted metal surface on the chassis.
• Avoid touching the adapter against your clothing. The wrist strap protects components from
ESD on the body only.
• Handle the adapter by its bracket or edges only. Avoid touching the printed circuit board or
the connectors.
• Put the adapter down only on an anstac surface such as the bag supplied in your kit.
• If you are returning the adapter to Xilinx Product Support, place it back in its anstac bag
immediately.
Installing Alveo Data Center Accelerator
Cards in Server Chassis
Because each server or PC vendor's hardware is dierent, for physical board installaon
guidance, see the manufacturer’s PCI Express
®
board installaon instrucons.
For programming and start-up details, see Geng Started with Alveo Data Center Accelerator Cards
(UG1301).
Chapter 2: Card Installation and Configuration
UG1289 (v1.1.1) November 20, 2019 www.xilinx.com
Alveo U200 and U250 Accelerator Cards 14
Send Feedback

Xilinx Alveo U250 Specifications

General

Brand	Xilinx
Model	Alveo U250
Category	Computer Hardware
Language	English