Make a soft gain adjustment. Besides gain adjustment, notch filter is automatically
adjusted.
Make special adjustment for positioning purpose. Besides gain adjustment, the model
loop gain and notch filter are automatically adjusted.
Fast
positioning
（control
overshoot）
In the use of positioning, we should pay attention to adjusting without overshoot.
Besides gain adjustment, the model loop gain and notch filter are automatically
adjusted.
Fit for the adjustment of lower rigidity mechanism such as synchronous belt
mechanism.
It is suitable for adjustment of higher rigidity mechanism such as ball screw
mechanism. If there is no corresponding mechanism, please choose this type.
It is suitable for the adjustment of rigid body system and other mechanisms with higher
rigidity.
To Next Page
Loading...
