Xinje DS5K Series

Appendix 8.6 External pulse speed control general parameters
External pulse speed control
Parameter
Overview
P0-01 control mode selection
Set to 7: external pulse speed mode
P0-10 pulse command format
Set the pulse format
0-CW/CCW
1-AB
2-P+D
P0-15 Command pulse frequency at rated
speed
Determine the linear relationship between the command
pulse frequency and the speed
P0-16 Speed command pulse filtering time
When the command pulse frequency is relatively low,
setting this parameter properly can reduce the speed
fluctuation
tudonghoatoancau.com