Xinje DS5K Series

5.7.7 Time limit curve of overload protection
The time limit curve of overload protection is only used for the judgment of alarm output and the
protection of overload operation. It is recommended to use it within the continuous operation stage of
torque speed curve. For the torque speed curve, please refer to appendix 9.
Applicable model (motor code)
5022
5822
5003
5803
50C3
58C3
5004
5804
50C4
58C4
4004
50C5
58C5
5011
5811
50D1
58D1
4011
4012
50D7
5012
50D2
Applicable model (motor code)
5072
5872
9072
9872
tudonghoatoancau.com