U2-XX：
out of factory date: year
out of factory date: month
Total running time (from the first time power on)
Total running time (from the first time power on)
Total running time (from the first time power on)
This time running time (from this time power on)
This time running time (from this time power on)
This time running time (from this time power on)
Average output power (from the first time enabled, average power in
the process of enabling)
Average thermal power (from the first time enabled, average power in
the process of enabling)
Average bus capacitor filter power (from the first time power on,
average power in the process of power on)
Device serial no.: low 16-bit
Device serial no.: high 16-bit
Firmware generation date: year
Firmware generation date:month/day
Firmware generation date: hour/minute
U3-XX：
Motor code (including thermal power parameters) read
automatically by driver
Automatically read the motor code of the encoder in the motor
parameters (only related to the motor code)
U4-XX:
Resonance frequency detected by fast FFT
To Next Page
Loading...
Need help?
General
