36 37
the weather stripping. Run the cable inside of the weather stripping to the
bottom of the door opening.
4 Pull the cable out of the weather stripping at the bottom of the door
opening and route it under the carpet toward the dashboard. Coil any
excess cable in a hidden location, such as under the carpet, keeping it
away from any vehicle pedals or controls. Secure the excess cable with
wire ties.
5 Bring the end of the cable out at the PowerConnect Vehicle Dock location.
Leave yourself enough cable so you can easily connect it to the antenna
connector of the dock.
6 Continue with “Step 5: Connect the Magnetic Mount Antenna and
PowerConnect Power Adapter” on page 37.
Vehicle Installation
Step 5: Connect the Magnetic Mount Antenna and
PowerConnect Power Adapter
1 Plug the Magnetic Mount Antenna into the
silver ANT connector on the PowerConnect
Vehicle Dock.
2 Insert the PowerConnect Power Adapter into
your vehicle’s cigarette lighter or power
adapter socket.
3 Plug the PowerConnect Power Adapter into
the red PWR connector on the dock.
AUDIOANT PWRFM
AUDIOANT PWR FM
To Next Page
Loading...
Need help?
General
