62 63
Special Features
Pause & Replay
Pause & Replay gives you the opportunity to “hear that again” by temporarily
storing and letting you access content of the currently tuned channel which
played in approximately the last 30 minutes. Pressing
or places Edge
into
Replay mode.
TIP! This feature applies to the current channel to which you are listening, and
for the current tuning and listening session only. Changing channels or turning
off Edge removes the temporarily stored content from the Radio.
To Play/Pause:
1 Press and release to pause the live broadcast. At this point the Radio
will mute and continue to store live audio.
2 Pressing and releasing again will begin playing stored audio from the
point at which the program was paused.
TIP! Pressing (or pressing twice, if favourite channels are stored) will show
the Replay List. A listing of artist names and song or show titles are shown for
the stored audio from most recent to oldest, beginning with entry called “Go to
live”. Turn the Rotary Knob to
scroll to highlight a song or program and press
the Select button to play it. Choosing “Go to live” exits Pause & Replay mode
and resumes playing the live broadcast.
To listen to the previous track:
1 Press and release
to rewind to the beginning of the current song
or program.
2 Repeated press and releases skips backwards to the start of the previous
songs or programs until the beginning of the stored audio is reached.
When the beginning is reached, playback automatically begins.
TIP! Pressing and holding rewinds through stored audio in 10 second
intervals, which increases to 15 and then 30 second intervals the longer the
button is pressed. Playback begins when the button is released. If beginning of
the stored audio is reached, playback automatically begins.
To listen to the next track:
1 Press and release to skip forward to the start of the next song
or program.
2 Repeated press and releases skips forward to the beginning of the next
songs or programs until the end of stored audio is reached. When the end
is reached, Edge exits Pause & Replay mode and resumes playing the live
broadcast.
TIP! Pressing and holding advances through the stored audio in 10 second
intervals, which increases to 15 and then 30 second intervals the longer the
button is pressed. Playback begins when button is released. If end of stored
audio is reached, Edge exits Pause & Replay mode and resumes playing the
live broadcast.
To listen to live broadcast:
1 Pressing and holding
while Edge is in Pause & Replay mode exits Pause
and Replay mode and resumes playing the live broadcast.
Length of Stored
Content Behind
Play/Pause Point
Time Behind Live
Broadcast
To Next Page
Loading...
Need help?
General
