54 55
FM Button
Pressing FM provides easy tuning of FM presets for optimized
PowerConnect performance. Repeatedly pressing FM displays and cycles through
the list of preset FM channels one at a time. The Radio automatically tunes to the
displayed FM channel. Pressing and holding FM accesses the FM Settings menu.
It is not available when an Aux In Cable or Cassette Adapter is used for audio
connection.
Jump Button
Depending on how it is configured, pressing jump either tunes to the
channel broadcasting traffic and weather conditions of a city of your choice,
selected from a list of the 22 most congested cities, or tunes to the previous
channel that was being played. Pressing it again returns it to the original channel.
Pause and Replay Buttons
Replays approximately 30 minutes of live radio.
plays/pauses, rewinds, and
fast-forwards through temporarily stored content.
# Button
Pressing # prompts for the entry of a channel number using the number buttons.
Once the channel number is entered, the Radio directly tunes to the new channel.
Number Buttons
Each number button stores a favourite channel in its button location and provides
one touch access to it afterward. Number buttons also directly tune to a channel
when the channel number is entered after pressing #.
fm
jump
#
1 0
Listening to Satellite Radio
Tune to a channel:
Turn the Rotary Knob
to immediately tune to
the next or previous channel. When changing
channels, the channel category will be
displayed briefly at the top left of the screen.
View a category:
Channels are organized into categories to
make it easier for you to find the ones that
suit your taste.
To view channels in a category in list mode
press
or .
1 Scroll through the category by turning
the Rotary Knob
, and find the channel
you want.
2 Press the Select button to select
the channel, or press
or to view
channels in the previous or next
category.
TIP! To briefly listen to each channel in
the category, scroll to and highlight Scan
at the end of the category list and press
the Select button. Refer to “Scanning
Channels in a Category” on page 58 to
learn more about Scan.
TIP! See “Channel Tuning” on page 72 to learn about the two different channel
tuning modes.
Using Your Edge
Channel Tuning set to
Tune by Channel
Channel Tuning set to
Tune by Category