XOR electronics Nerdseq User Manual

NerdSEQ
Hybrid Tracker Sequencer, Synthesizer
and Toolbox
User Manual
Please be aware that this is an ever growing manual. Save the trees by not printing it out!
NerdSEQ – a tracker based Eurorack sequencer Page 1
User Manual Revision V1.26 for Firmware V1.26 12 July 2022

XOR electronics Nerdseq Specifications

General

Storage	MicroSD Card
Inputs	Clock, Reset
Connectivity	MIDI
Display	LCD
Power Consumption	+12V: 20mA, -12V: 20mA

Summary

Introduction

Getting Started

Buttons and Navigation

Sequencer Screen

Pattern Screen

Pattern Screen (CV/Gate Track)

Detailed layout and columns for CV/Trigger/Mod patterns.

Pattern Screen (Audio Track)

Interface and parameters for sequencing samples and waveforms.

Pattern Screen (Midi track)

Screen layout and functions for sequencing MIDI data.

Automator screen

Envelope screen

Project screen

Setup Screen

Track Assign Screen

Track Setup Screen

Track Setup (CV/Gate Track)

Specific settings for CV/Gate tracks, including clock, transpose, and delay.

Track Setup (Audio Track)

Settings for audio tracks, including delay, FM, and sample/wave parameters.

Track Setup (Midi Track)

Settings for MIDI tracks, including channel, note offset, and recording.

Sample / Wave / Synthesis

Recording / Live Input / Midi Input

Live Input with the 1..4 Input definitions

Assigning CV inputs to manipulate destinations live.

NSA Firmware Update Screen

Firmware update