These buttons can be assigned to the following functions:
Buttons of the NerdSEQ: Sequencer/Mark, Pattern/Copy, Patch/Delete,Table/Record,
Automate/Nerd, Project/Setup, Start, Stop, Up, Shift, OK, Down
Additionally mappings:
Gate1..6 → Sets the local gates 1..6 when the button is pressed and releases it when the button is
released.
Trigger 1..6 → Fires a Trigger on a button press
Trigger and Gate settings can also be recorded if the function is enabled in the record settings.
Sample 1..4 → Plays the selected sample (last played sample, last selected pitch) while sample 1
and 2 are played form Audio-output 7 and 3,4 are played from Audio-output 8.
Mute Track → Mutes the selected track (or drum part with Trigger16)
Solo Track → Solo the selected track (or drum part with Trigger16)
Jump Track → Jumps to the new selected pattern in a track on the same position where the
sequencer was. ( Same as OK button if edit is disabled )
Jump Row → Jumps to the new patterns of the complete row
None → Nothing selected for the gamepad.
The D-Pad is only usable for the general navigation and can’t be assigned to any other function.
The settings are automatically saved by leaving the menu.
Expander Modules
There are several expander modules which enhance the functionality of the NerdSEQ.
Midi Expanders
• IO-Expander. It enhances the NerdSEQ with a Midi-In, Midi Out (DIN5) port and a
connector for a Sega Gamepad controller.
The Midi functionality is for clocking in and output, to play and record from Midi (Midi→CV
Conversion) and also polyphonic multi channel midi recording and sequencing.
A Sega Gamepad
8
(Sega Genesis 6 Button Controller), which can be used for navigation,
editing, live playing and further manipulations can be connected to the Gamepad
Connector. The Gamepad buttons can be assigned to several functions in the Setup →
Sega Gamepad Mapping Screen Screen.
8 https://en.wikipedia.org/wiki/Gamepad#/media/File:Sega-Genesis-6But-Cont.jpg
NerdSEQ – a tracker based Eurorack sequencer Page 116
User Manual Revision V1.26 for Firmware V1.26 12 July 2022
To Next Page
Loading...