However, the sequencer can run while pre-listening. By using SHIFT+ UP/DOWN the selected
octave can be changed for pre-listening.
Below is the sample-slot window with 4 loaded slots:
Nerd Screen / Menu
The Nerd button opens a special function menu. Depending on the current position of the cursor,
Sequencer or pattern screen and if a block is marked or not, different choices are available to
manipulate the selection.
NerdSEQ – a tracker based Eurorack sequencer Page 105
User Manual Revision V1.26 for Firmware V1.26 12 July 2022
To Next Page
Loading...