- 190kB Sample memory (4 seconds with 44.1 kHz/8 Bit/Mono or more with lower
samplerate)
- Audio support for samples, waveforms, synthesis
- Sample support for RAW 8 bit mono and WAV 8/16 bit, Mono/Stereo
- Projects as many as the SD card can hold
- With expanders drum-matrix with euclidean editing, envelopes, LFO’s...
Firmware Features
- 8 Tracker tracks can be controlled independently, synchronised and not synchronised
- CV outputs can generate 1V/Oct, 1.2V/Oct and Volt/Hz octave ranges
- ‘Endless’ Pattern chaining
- Euclidean input for Rhythm composing
- Probability (0..100% with 1% resolution) for a sequencer row or for dedicated functions: CV,
Mod, Trigger/Gate, Tables, Samples and FX (which can contain every feature)
- Patterns with Note Scaled input, Patch selection, Trigger/Gate w retrigger, delayed triggers
etc, CV Modulation manipulation, Groove, Fine pitch, Glide, Glide quantisation, Table
selection
- Multiple direct FX possibilities per pattern per step
- Groove per step per pattern to create different step lengths, shuffle and weird rhythmic with
the possibility to create poly-rhythmic tracks
- Patches with all wanted functions directly accessible
- Tables (sequencer in the sequencer) for Transpose, scaling and all possible functions,
different speed/note scales and sources, synchronised and not synchronised to the main
sequencer clock, randomisation functions
- Automation slots to assign different automations (like LFO, Envelopes, Noise,
Randomness..etc) freely connect to internal and external parameters via a modulation
matrix
- 8 ADSR Envelopes with rich setup, source and destination functionality
- Project management
- Sample management
- Clock Source can be Internal, 1/16 via Clock input, 24ppqn, Midi Clock, DinSync
- Clock Outputs can be 1/16, DIN-Sync , Midi Clock
- Track dividers / multipliers (/32,/16,/8, /7,/6,/5,/4,/3,/2, *2,*3,*4,*5,*6,*7,*8)
- All Modular tracks can be manipulated from other Modular tracks
NerdSEQ – a tracker based Eurorack sequencer Page 7
User Manual Revision V1.26 for Firmware V1.26 12 July 2022
To Next Page
Loading...