Chapter 2 Using Your L10 Tablet Using Global Navigation Satellite System (GNSS) 25
Using Global Navigation Satellite System
(GNSS)
Your L10 tablet might be equipped with an optional, embedded mobile broadband with GNSS or
embedded GNSS with Standard-Based Augmentation System (SBAS). See Optional Features on
page 2.
Use the information in this section to enable location services. To use location services, you do not
need a network connection or an account with a mobile broadband network carrier.
Enabling Location Services
1. Tap Start icon and tap the Settings icon above it.
2. Tap the Privacy icon.
3. In the left pane, under App permissions tap Location.
4. Tap the Location service switch to turn it on.
Note: The virtual communications port, which is assigned to the location services
receiver by Windows, can be viewed in the Device Manager.
To Next Page
Loading...
Need help?
General
