Xplore iX101L1 - Using the SD Card Reader; Inserting an SD Card; Removing an SD Card; Locating Your Serial Number

Chapter 2 Using Your L10 Tablet Using the SD Card Reader 37
Using the SD Card Reader
The L10 tablet includes an SD card slot for adding an SD memory card. The memory card provides
extra storage for media files from your camera, videos, downloaded files, and data from other
devices.
Inserting an SD Card
1. Turn off the tablet.
2. Open the port cover of the left side of the tablet and locate the SD card slot.
3. Push the SD card with the contacts facing down into the slot until it clicks into place.
4. Resume using the tablet.
Removing an SD card
1. Turn off the tablet.
2. Open the port cover.
3. Push the card in slightly until it pops out.
4. Resume using the tablet.
Locating Your Serial Number
You can locate the serial number for your L10 tablet in these places:
• White label underneath the battery, which is located on the back of the tablet. The
number begins with “S/N.” To remove the battery, see Removing and Replacing the
Battery on page 16.
• Tap the Start > Settings icons to display the Windows Settings menu.
Tap the System icon and scroll to the bottom of the left pane and tap About.
Under Device specifications, the serial number is designated by Product ID.
Empty SD
card slot