XS Instruments 60 VioLab Series User Manual

13
Rev. 1.0 31/01/2020
EN
• Key functions
Button
Pression
Function
Short
Press to turn the device on or off.
Short
In measure mode, press to scroll through the different parameters:
•
pH 60 VioLab: pH  mV  ORP
• COND 60 VioLab: Cond  TDS  Sal
• PC 60 VioLab: pH  mV  ORP  Cond  TDS  Sal
Short
• In calibration, setup and memory recall mode, press to return to measure
mode.
• In measure mode, press to start the calibration.
Short
In measure mode, press to enter the setup.
In the setup menus, press to select the desired program and / or value.
During calibration, press to confirm the value.
Short
In the setup and subset menus press to scroll
In the setup submenus, press to change the value
In memory recall mode, press to scroll through the saved values.
In MTC and customer calibration mode, press to change the value.
: In measure mode, press to save the data or print
: In measure mode, press to recall the saved data.
Long-Press
(3s)
In measure mode, keep one of the two keys pressed to change the temperature
in MTC mode (manual compensation, without probe). When the value starts to
flash, the user can change the temperature value by entering the correct one and
confirming with
The correct use of the function keys and the attention in pressing them, given the small size, eliminates the
residual risk of minor damage, not probable, caused by simultaneous pressing of the keys; before using the
instrument, check that pressing the keys has the corresponding effect on the display.
• Inputs / Outputs Connections
Use original accessories guaranteed by the manufacturer only.
If necessary, contact your local distributor.
The BNC connectors are protected by a plastic cap.
Remove the cap before connecting the probes.

XS Instruments 60 VioLab Series Specifications

General

Brand	XS Instruments
Model	60 VioLab Series
Category	Measuring Instruments
Language	English