10 FAQ
Q1: FAILED TO GENERATE DIAGNOSIS REPORT
1. Currently only perform diagnostic functions, that is, read
ECU information, read code and clear code, live data,
freeze frame, which can trigger a diagnostic report. Other
functions, such as immobilization and maintenance
services will not be displayed in the report.
2. After entering the diagnosis menu, you need to perform one
specific function before the system can generate a
diagnosis report normally. After the diagnosis is
completed, you need to step back to the previous menu
step by step to generate the diagnosis report successfully.
If the APP is killed directly, the report also cannot be
triggered.
3. If the report still cannot be generated after troubleshooting
according to the above prompts, please try to exit the APP,
enter the system settings, and then choose to clear the
APP cache.
Enter the path: Setting>>Apps>>Diagnosis>>Clear Cache
To Next Page
Loading...
