5.8 GEARBOX MATCH
After changing the gearbox or changing the gearbox ECU, you
need to use the gearbox matching function to re-match the
engine and the gearbox.
Before resetting the gearbox, please check the gearbox control
unit to ensure that there is no fault code. If there is a fault code,
the gearbox memory function cannot be reset. Please road test
after reset.
The operation guidelines of the Gearbox Matching
function are shown as below:
1. Enter the Gearbox matching menu and choose relevant
models according to the vehicle being tested.
2. Enter the Reset adaptive value menu.
3. Turn on the ignition without starting the engine.
4. Read the note and press OK to continue the Gearbox
Matching function.
To Next Page
Loading...
Need help?
General
