EasyManuals Logo
Home>Xtool>Diagnostic Equipment>D8 BT

Xtool D8 BT User Manual

Xtool D8 BT
121 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
47
*Note:
a) Due to the limitation of screenshots, the special functions shown in this
picture are not complete.
b) All special functions supported by D8 BT are subject to the actual
special functions displayed on the device.
5.1 OIL RESET
Reset the Engine Oil Life System, which calculates the
optimum oil life change interval based on the vehicles driving
conditions and climate. The oil life reminder must be reset each
time the oil is changed so that the system can calculate when
the next oil change is required.
This function can be performed in the following cases:
If the service lamp is on, you must provide service for the
car. After service, you need to reset the driving mileage or
driving time so that the service lamp turns off and the
system enables the new service cycle.
After changing engine oil or electric appliances that
monitor oil life, you need to reset the service lamp.
The operation guidelines of the Oil Reset function are
shown as below:
1. Enter the Oil Reset menu and choose relevant models
according to the vehicle being tested.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xtool D8 BT and is the answer not in the manual?

Xtool D8 BT Specifications

General IconGeneral
BrandXtool
ModelD8 BT
CategoryDiagnostic Equipment
LanguageEnglish

Related product manuals