Capillary Tube Air Sampling
Components
Refer to Section 3.6 for further information.
Sampling Point E700-SP
Capillary Tube E700-TUBE Inside Diameter = 3/8"
Capillary Tube Connector E700-CAP-KIT
FPT Pipe Tee VP-TEE-FPT
Corner Studs 20-LA0016-01
Corner Stud Key 20-LA0015-03
Rubber Grommet 27-1002-00
Pipe Cutter VP-CUTTERS
Table3-4: XAS-2-US Open Area Application Accessories List (continued...)
Note: For open area protection, parts are ordered as follows:
l XAS-2-US unit
l required length of 3/4" CPVC pipe
l fittings as required for application
l sample points and capillary tubing required for application
l cement for CPVC pipe + fittings
Xtralis Pty Ltd Xtralis XAS-2-USProduct Guide
www.xtralis.com 25