Need help?Do you have a question about the Xtralis XCC-010 and is the answer not in the manual?
General| Brand | Xtralis |
|---|---|
| Model | XCC-010 |
| Category | Smoke Alarm |
| Language | English |
Covers copyright, disclaimers, general warnings, and liability statements.
Explains typographic conventions and icons used throughout the document.
Details regulatory compliance, FCC, FDA, EN54-20, and Lloyds Register information.
Lists key capabilities of the XCC detector, including area coverage and threshold settings.
Describes the 4 sensitivity thresholds for different pipe configurations.
Explains that pre-alarm is set at 70% of fire-alarm thresholds.
Details pre-engineered pipe networks for drilled holes and capillaries.
Details the termination card, relay terminals, and their settings.
Covers auxiliary inputs, GPI terminals, and programming interfaces.
Shows connection schematics to panels and power supply.
Instructions on mounting the detector and securing the bracket.
Guidelines for connecting inlet and exhaust pipes.
Information on backup battery calculation and initial startup.
Steps for commissioning and a checklist for installation completion.
Explains the meaning of LED indicators and the reset/disable button.
Identifies internal parts and provides steps for opening the detector.
Procedures for replacing the filter cartridge and the aspirator.
Technical specifications, operating conditions, and physical dimensions.
Lists default parameters and recommended spare parts.
To Next Page