Xtralis Pty Ltd XCC Product Guide
www.xtralis.com 1
Table of Contents
1 Introduction 3
1.1 Features 4
2 Pipe Networks 5
2.1 XCC-010 with Drilled Holes 6
2.2 XCC-010 with Capillaries 7
3 Wiring Connections 9
3.1 Termination Card 9
3.2 Relay Terminals 9
3.3 Relay settings and conditions to change states 9
3.4 Auxiliary / GPI Terminals 10
3.5 Programming Socket 11
3.6 Typical Wiring to a Fire Panel with an EOL Resistor 11
3.7 Wiring to an Addressable Loop Module 11
3.8 Power Source 12
4 Installation 13
4.1 Mounting the Detector 13
4.2 Connection to Pipe Network 14
4.3 Battery Backup 15
4.4 Startup 15
4.5 Commissioning 16
4.6 Installation Checklist 17
5 Operation 19
5.1 Display 19
6 Maintenance and Servicing 21
6.1 Internal Components 21
6.2 Opening and Closing the Detector 22
6.3 Replacing the Filter Cartridge 23
6.4 Replacing the Aspirator 24
7 Product Information 25
7.1 Specifications 25
7.2 Dimensions 26
7.3 Default Settings 28
7.4 Spare Parts 28
Index 29
To Next Page
Loading...
