P70642
P70643
(2) Required
(1 Each Side)
Alternate
Location
P2002458
P70820
DO NOT RUN PUMP DRY, SEAL
DAMAGE MAY OCCUR.
INSPECT PUMP SEAL
REGULARLY FOR LEAKS,
REPLACE AS REQUIRED.
LUBRICATION REQUIREMENTS
CONSULT MANUALS.
PUMP: POLYUREA-BASED GREASE
FAILURE TO FOLLOW
INSTRUCTIONS COULD
RESULT IN INJURY OR
PROPERTY DAMAGE.
Make sure that all safety instruction decals are always clearly visible and readable.
1.2.3 User safety
General safety rules
These safety rules apply:
• Always keep the work area clean.
• Pay attention to the risks presented by gas and vapors in the work area.
• Avoid all electrical dangers. Pay attention to the risks of electric shock or arc flash
hazards.
• Always bear in mind the risk of drowning, electrical accidents, and burn injuries.
Safety equipment
Use safety equipment according to the company regulations. Use this safety equipment
within the work area:
• Hard hat
• Safety goggles, preferably with side shields
• Protective shoes
• Protective gloves
• Gas mask
• Hearing protection
• First-aid kit
• Safety devices
1 Introduction and Safety
Series e-1510 INSTRUCTION MANUAL 5
To Next Page
Loading...
Need help?
General
