Maintenance
ENM-10 is very durable and practically maintenance free. You only have to check on it
occasionally, to ensure its continual operation.
• It is recommended to occasionally clean ENM-10, and especially when fat/grease
covers the plastic surface
• At the same time, make an occular inspection of the regulator to make sure neither
cable, protective sleeve or plastic casing show any signs of damage
• A damaged ENM-10 cannot be repaired in any way, due to the hermetic
encapsulation. If the unit is found to be damaged, replace it with a new one
• It is recommended to occasionally clean ENM-10, and especially when fat/grease
covers the plastic surface
• At the same time, make an occular inspection of the regulator to make sure neither
cable, protective sleeve or plastic casing show any signs of damage
• A damaged ENM-10 cannot be repaired in any way, due to the hermetic
encapsulation. If the unit is found to be damaged, replace it with a new one
• For Ex-installations/Ex-ENM-10, also make absolutely sure that the Ex-barrier is
operating correctly
• - The LED changes when the switch is toggled
Product Description
Flygt ENM 10 Level regulator Installation, Operation and Maintenace Manual 13
To Next Page
Loading...
