Xylem Flygt ENM 10 User Manual

Country Electrical Data
Switzerland 6 A, 250 V, AC
Sweden 10 A, 230 V, AC Resistive load
3A, 250 V, AC Inductive load
5 A, 30 V, DC Resistive load
*1 mA, 5 V, DC, Gold Contact
* Part no: 594 79 19 & 594 79 20
Safety data for EX approved installation
Maximum input voltage, U
i
: 30 V
Maximum input current, I
i
: 100 mA
Maximum input power, P
i
: 1.2 W
Depth of immersion: Max 20 m
For cable length 20 m:
Maximum internal capacitance, C
i
: 1.8 nF
Maximum internal inductance, L
I
: 10 μH
Approvals
CE, CSA, SEMKO, NEMKO, DEMKO, EX
LVD approval according to EN61058
CSA approval: Cert no. 1330172
Cl.I Zone 0, Gr. IIC;
CL.I Div.1 Gr A, B, C&D
Cl.II Gr. E, F&G
Cl.III when installed to the certified Intrinsically Safe relay, Ex ia, rated for the locations per
submitter control drawing and installation manual.
Ex approval:
IECEx ia IIC T4 Ga: -20°C<Ta<60°C
IECEx NEMKO 09.008
ATEX II 1G ia IIC T4
NEMKO 10ATEX 1082
The applied standards are:
EN 60079-0:2009/IEC 60079-0:2007
EN 60079-11:2007/IEC 60079-0:2006
EN 60079-26:2007/IEC 60079-26:2006
Intrinsically safe circuits are required for the automatic control system. - Use a EX-safety
barrier (e.g. Prod. no. 84 01 07).
0080
R
Safety
Flygt ENM 10 Level regulator Installation, Operation and Maintenace Manual 7

Xylem Flygt ENM 10 Specifications

General

Brand	Xylem
Model	Flygt ENM 10
Category	Controller
Language	English