Xylem HYDROVAR HV 4.022 User Manual

50
10.3 Display of the BASIC Inverter
Status LED - green
Constant Motor stopped (Standby)
Blinking Motor run
Error LED - red
The type of error is indicated by the blinking-code of the ERROR LED.
1 blink Undervoltage
2 blinks Overcurrent / Overload
3 blinks Inverter overheat
4 blinks Overvoltage
5 blinks Code Error
6 blinks Motor overheat (external contact is open)
For detailed information see chapter 11 Failure messages.

Xylem HYDROVAR HV 4.022 Specifications

General

Brand	Xylem
Model	HYDROVAR HV 4.022
Category	Controller
Language	English