Xylem SI Analytics HandyLab 100 - General Operating Principles; Operating Modes

HandyLab 100 Operation
15
ba77062d02 12/2017
4.2 General operating principles
This section contains basic information on the operation of the
HandyLab 100.
Operating elements,
display
An overview of the operating elements and the display is given in sec-
tion 1.1 and section 1.2.
Operating modes,
navigation
An overview of the operating modes and navigation of the
HandyLab 100 is given in section 4.2.1 and section 4.2.2.
4.2.1 Operating modes
The instrument has the following operating modes:
 Measuring
The measurement data of the connected sensor are shown in the
measured value display
 Calibration
The course of a calibration with calibration information, functions
and settings is displayed
 Storing in memory
The meter stores the measurement data manually
 Setting
The system menu or a sensor menu with submenus, settings and
functions is displayed