Xylem SI Analytics HandyLab 100 - Navigation Example 1:Setting the Language

Operation HandyLab 100
18
ba77062d02 12/2017
4.2.3 Navigation example 1:Setting the language
1 Press the <On/Off> key.
The measured value display appears.
The instrument is in the measuring mode.
2 Using <F1_>/[Menu], open the Storage & config menu.
The instrument is in the setting mode.
3 Select the System submenu with <><>.
The current selection is displayed with a frame.
4 Open the System submenu with <ENTER>.
pH
6.949
25.0 °C
15.03.2014
08:00
Menu
System
Data storage
Storage & config
15.03.2014
08:00
Back