HandyLab 100 Operation
21
ba77062d02 12/2017
4 Change and confirm the setting with <><> and <ENTER>.
The minutes are highlighted.
5 Change and confirm the setting with <><> and <ENTER>.
The seconds are highlighted.
6 Change and confirm the setting with <><> and <ENTER>.
The time is set.
7 If necessary, set the Date and Date format. The setting is made
similarly to that of the time.
8 If necessary, select and set the Date with <><> and
<ENTER>.
9 To make further settings, switch to the next higher menu level
with <F1>/[Back].
or
Switch to the measured value display with <M>.
The instrument is in the measuring mode.
Date format: dd.mm.yyyy
Date
: 15.03.2014
Time: 14:53:40
Clock
15.03.2014
08:00
Back
To Next Page
Loading...
