Xylem SI Analytics Lab 855 - What to Do if; No Stable Measured Value; Error Message Calerror

What to do if... Lab 855
36 ba77143e02 12/2017
10 What to do if...
10.1 pH
10.1.1 No stable measured value
10.1.2 Error message CalError
More information and instructions on cleaning and exchange of
sensors are given in the documentation of your sensor.
Cause Remedy
• Junction of the electrode contami-
nated
• Clean the junction
• Glass membrane of the electrode
contaminated
• Clean the glass membrane
Cause Remedy
• pH value of the test sample not
stable
• Measure with air excluded if neces-
sary
• Temperature of the test sample not
stable
• Adjust temperature if necessary
Cause Remedy
• The values determined for zero
point and slope of the electrode are
outside the allowed limits.
• Recalibrate
• Junction contaminated • Clean the junction
• pH electrode broken • Replace the pH electrode