112
The next dosage operation can be started immediately.
Filling of the unit will occur automatically.
(This option can be switched off. Then the cylinder will be filled when the maximum cylinder volume is reached).
The unit can be filled at any time using <FILL>.
<ESC> will take you back to the main menu.
3.6.2.2 Dosing operation without dosing method
A dosing operation can also be performed without any dosing method with <DOS>/<F10> of the external
keyboard (Fig. 48).
Fig. 48
The volume will be dosed with <ENTER>/<OK> (Fig. 49).
Fig. 49
The next volume can be carried out immediately with <ENTER>/<OK> (Fig. 50).
Fig. 50
Filling of the unit following dosage will not occur automatically here, unless the maximum cylinder volume has
been reached.
The unit can be filled at any time using <FILL>.
<ESC> will take you back to the main menu.
To Next Page
Loading...
