Xylem WTW OxiTop-IDS Multi 3630 IDS - Evaluating the Samples

Multi 3630/3620 IDS Operation with OxiTop
®
-IDS measuring heads
ba77045d02 03/2020 27
5.3 Evaluating the samples
You can view the current measurement data for each OxiTop
®
-IDS measuring
head at any time (during or after the measurement).
5
 Display the momentary value with <STO>.
– Save the momentary value with <MENU/ENTER>.
or
– Exit the display without saving with <ESC>.
 Display any momentary values that were already saved with
<RCL>.
1
Using <><>, highlight a set in the OxiTop set management Set.
2
Open the details of the selected set with <MENU/ENTER>.
The measuring heads automatically call up the current data of the set.
The reading out takes approx 5 seconds per OxiTop
®
-IDS measuring
head, with many measurement data it may take longer.
3
Select a sample of the set and open the details of the selected sample
with <MENU/ENTER> or <F1>/[
i ].
A-1 4000 mg/l BOD180 1/1
A-2 357 mg/l BOD180 2/3
79 Free meas. heads
Set name 190216-1
15.03.2020 08:00
Delete
i